Bulletins

Ox Engineered Products, LLC 286n Homasote Company 930j Ox Paperboard Michigan LLC 942j Flex Membrane International 1037L Sika Sarnafil Inc. 1077g Siplast, Inc. 1088i Danosa Caribbean, Inc. 1094L Homasote Company 1150j Duro-Last Roofing, Inc. 1223g Bitec, Inc. 1229j Boise Cascade Wood Production 1241d Boise Cascade Wood Production 1242e Hacker Industries, Inc. 1255g James Hardie Building Products, Inc. 1263h James Hardie Building Products, Inc. 1268g Uponor, Inc. 1269h Viega, LLC. 1276h Maxxon Corporation 1286e Bow Publishing Group, Inc. 1293g	Flex-Strong Concrete Solutions, Inc. 1294d Mohawk Industries, Inc. 1295f REHAU Construction LLC 1296g Shaw Industries, Inc. 1312f Mohawk Industries, Inc. 1313d Mohawk Industries, Inc. 1313e Louisiana-Pacific Corporation 1318e Shaw Industries, Inc. 1319e POLYGLASS USA, Inc. 1320e Mohawk Industries, Inc. 1324c Mohawk Industries, Inc. 1324d Mohawk Industries, Inc 1326b Phenix Flooring 1327d Engineered Floors 1337b Soprema, Inc. 1340b KWP, Inc. 1342b Resisto, a division of Soprema, Inc. 1344 Tarkett Home 1346 Marquis Industries 1347 Ox Engineered Products, LLC 1348

Structural Engineering Bulletins

Use of Materials Bulletins

UM 17e	Concrete Roofing Tile
UM 38j	Grade Marking of Lumber
UM 40c	Plywood and Other Performance Rated Wood-Based Structural-Use Panels
UM 44d	Carpet
UM 48	Pressure-Treated Lumber and Plywood
UM 52a	Wood Finish Doors
UM 58a	Acrylic Plastic Sheets and Glazing
UM 60a	Construction Adhesives for Wood Floor Systems
UM 62a	Factory-Applied Laminate Roofing Systems Based on Chiorosulfonated
UM 65	Controlled Density Cellular Concrete Floor Fill
UM 67	Polycarbonate Plastic Sheets for Glazing
UM 70b	Particleboard Interior State Treads
UM 71a	Polystyrene Foam Insulation Board
UM 72a	Carpet Cushion
UM 73a	Plastic Bathroom Fixtures
UM 74	Thermal Insulation, Urea-Based, Foamed in Place
UM 76	Chlorinated Poly (Vinyl-Chloride) CPVC and Polybuthlene (PB) Hot And Cold
UM 77a	Cast Iron Sanitary Drainage System With Hubless Pipe and Fittings
UM 78	Polyethylene (Pe), Acrylonitrile - Butadiene - Styrene (ABS), Poly (Vinyl)
UM 79a	Acrylonitrile-Butadiene-Styrene (Abs) and Poly (Vinyl Chloride) (PVC) Plastic
UM 80	Spray Applied Cellulosic Thermal Insulation
UM 82a	Sealed Insulating Glass Units
UM 84	Solid Fuel Type Room Heaters and Fireplace Stoves
UM 89	Exterior Insulated Steel Door Systems
UM 100	Solar Water Heating Systems
UM 101	Exterior Wall Insulation And Finish Systems
UM 111	Fenestration Products (Windows and Doors)

HUD Accepted UM Administrators

Manufactured Housing Interpretative Bulletins

Interpretative Bulletins for Manufactured Home Procedural and Enforcement Regulations (§3282)

EIB-H-1-76	Label Language Interpretation
EIB-H-1-77	PIA Responsibility for Documents Required to be Provided with a Manufactured Home
EIB-H-2-77	IPIA Responsibility for Application of Serial Numbers
EIB-H-1-78	IPIA Responsibility for Plant Approval
EIB-H-1-94	Consumer Complaint Handling and Remedial Actions

Interpretative Bulletins for Manufactured Home Construction and Safety Standards (§3280)

IB-94-9689	Clarifications of Certain Rule Provisions
IB-94-16073	Waiver Relating to Certain Exterior Wall Cladding, Wind Standards
IB-A-1-77	Identification of State of Manufacture in the Mobile Home Serial Number
IB-A-1-78	Applicability of Residence Standards and Second Generation Reference Standards
IB-B-1-76	Swinging Exterior Passage Door Dimension
IB-B-2-76	Interior Door Construction
IB-B-3-76	Interior Door In Hallway
IB-C-1-91	Kitchen Cabinet Protection, Dimensions of the Range Hood
IB-C-2-76	Fire Protection for Furnace and Water Heater Spaces
IB-C-3-76	Combustible Kitchen Cabinet Protection
IB-C-4-76	3/8" Maximum Foam Plastic Siding Backer Board
IB-C-5-76	Foam Plastic Insulation Sheathing
IB-D-1-76	Allowable Design Stresses for Board Lumber
IB-D-1-77	Lumber Moisture Content
IB-D-2-76	Carpet Application
IB-D-4-76	Structural Design Criteria-Net Uplift
IB-E-1-76	Alternate Test Procedure in Lieu of Testing to Failure; Allowable Design Load Determination for Tested Assemblies
IB-E-1-78	Attachment of Latches Required to Hold Open Vertically Opening Egress Windows Sections
IB-E-2-76	Uplift Testing
IB-E-3-76	Egress Windows
IB-F-1-76	Condensation Control-Exterior Sheathing
IB-F-1-77	Air Infiltration at Wall-to-Wall, Wall-to-Ceiling, and Wall-to-Floor Connections
IB-F-2-77	Heat Loss Certificate
IB-G-1-77	Plastic Drain Line Fittings
IB-G-1-78	Venting Requirements for Systems Utilizing Anti-Siphon Trap Vent Devices
IB-G-2-76	Master Cold Water Shut-Off Valve
IB-G-2-78	Testing of Water System
IB-G-3-76	Anti-Siphon Trap Vent Device Materials
IB-G-3-78	Insert Fittings in Plastic Water Supply Systems
IB-H-1-76	Installation of Snap-In Type Boxes
IB-H-1-84	Waiver of Air Supply Duct Thickness Requirement
IB-H-2-77	Undercutting Bathroom Doors
IB-H-3-76	Vertical Clearance Over Cooking Top
IB-I-1-76	Provision of Exterior Furnace/Air Conditioning Equipment
IB-I-1-77	Location and Type of Outdoor Receptacle Outlet
IB-I-1-80	Substantial Brace Criteria
IB-I-2-76	Exterior Lighting Outlet
IB-I-2-77	External Heating and Air Condition Equipment
IB-I-2-98	Metal Roofing
IB-J-1-76	Transportation-Subpart J of Part 2380

Bulletins

On This Page

Materials Release Bulletins

Structural Engineering Bulletins

Use of Materials Bulletins

Manufactured Housing Interpretative Bulletins