Training Inspectors Webinars

Dine and Learn Logo

Recording Defects Correctly - May 25, 2022, at 7:00 PM (EST)

This session provides an overview of commonly miss recorded defects on a frequent basis.

View PDF Presentation »
View the webinar on YouTube »


How to Inspect a Unit - Part 4 of 4 - March 2, 2022, at 7:00 PM (EST)

This session is the conclusion and final presentation from part 1 that provides additional guidance on inspecting defects within a Unit. The Inspectable Items discussed in Part 4 of 4 are Smoke Detector, Stairs, Walls, Windows & Health & Safety.

View PDF Presentation »
View the webinar on YouTube »


How to Inspect a Unit - Part 3 of 4 – January 12, 2022, at 7:00 PM (EST)

This is the third installment on How to Inspect a Unit that provides additional guidance on inspecting defects within a Unit. The Inspectable Items discussed in Part 3 of 4 are: Kitchen, Laundry Area, Lighting, Outlets/Switches & Patio/Porch/Balcony.

This session will help inspectors to better know how to use the new buttons in the recording data and comments for these items that were prone to errors.

View PowerPoint Presentation (ZIP) »
*Note: PowerPoint Presentation is a large-sized file and will take a while to download. Desktop is the preferred method to download.
View PDF Presentation » 
View the webinar on YouTube »


How to Inspect a Unit - Part 2 of 4 – December 15, 2021, at 7:00 PM (EST)

This session is a continuation of part 1 that provides additional guidance on inspecting defects within a Unit. The Inspectable Items discussed in Part 2 of 4 are: Electrical Systems, Floors, Hot Water Heater & HVAC Systems.

This session will help inspectors to better know how to use the new buttons in the recording data and comments for these items that were prone to errors.

View PowerPoint Presentation (ZIP) » 
*Note: PowerPoint Presentation is a large-sized file and will take a while to download. Desktop is the preferred method to download.
View PDF Presentation » 
View the webinar on YouTube » 


How to Inspect a Unit - Part 1 of 4 - May 26, 2021, at 7:00 PM (EST)

The first of a 4-part series that will provide an overview of all defects associated within a unit, pictures of several defects, and how to develop a good Unit inspection routine from start to finish. Inspectable Items discussed in Part 1 of 4 are: Bathroom, Call-for-Aid, Ceiling & Doors; along with how to develop a good Unit inspection routine.

This session will help inspectors to better know how to use the new buttons in recording of data and comments for these items that were prone to errors.

View PowerPoint Presentation (ZIP) » 
*Note: PowerPoint Presentation is a large-sized file and will take a while to download. Desktop is the preferred method to download.
View PDF Presentation » 
View the webinar on YouTube » 


Updated RAPID Software - How & When to use New Buttons for Roof Access, Bed Bugs & Co Detectors Functionalities - Wednesday, May 19, 2021, at 7:00 PM (EST)

This session will help inspectors to better know how to use the new buttons in the RAPID software for Roof Access, Bed Bugs & CO Detectors. These buttons are replacing the manual recording of data and comments for these three items that were prone to errors.

View Presentation » 
View the webinar on YouTube » 


Inspection: Health & Safety - Blocked Egress Part 1 - Wednesday, February 24, 2021, at 7:00 PM (EST)
This session will help inspectors to appropriately observe and record Health & Safety defects associated with Blocked Egress as it applies Primary and Secondary routes of egress. 

View Presentation »
View the webinar on YouTube » 


Required Comments for the RAPID 4.0 Software (Roof, Bed Bugs, etc.) - Thursday, November 5, 2020, at 7:00 PM (EST)
This session will help inspectors to appropriately record required comments in the correct comment fields with the necessary information to prevent Inspections of Record being put on Hold because the PASS reviewers need the mandatory information for R&D or for other documentation.

View Presentation »
View the webinar on YouTube »


REAC Inspection Checklist - August 26, 2020
This session will help new and experienced inspectors to provide inspections that are accepted, and help prevent inspections from being put on hold or rejected.

View Presentation » 
View the webinar on YouTube »


Frequently Mis-recorded Defects Part 3 of 3 – July 29, 2020
This is the final session on misrecorded defects which provides specific insight on unit timestamp-related matters, recording health and safety defects, and errors associated with temporary or permanent off-line buildings and/or units.

View Presentation » 
View the webinar on YouTube »


Frequently Mis-recorded Defects Part 2 of 3 - June 24, 2020
This session is a continuation of part one that provides additional guidance on misrecorded defects and resources, such as the Compilation Bulletin, that are used to assist with identifying and recording deficiencies.

View Presentation » 
View the webinar on YouTube »


Frequently Mis-recorded Defects Part 1 of 3 - May 20, 2020
The first of a three-part series that provides an overview of commonly misrecorded defects and required comments for various defect levels and health and safety deficiencies.

View Presentation » 
View the webinar on YouTube »


Webinars: Recordings of live webinars originally conducted with an audience.

Return to REAC UPCS Training Page »

Questions? Email us.