Starting
January 1, 2008, all inspections must be conducted according
to the standards and practices outlined in this document, the REAC
Compilation Bulletin, Revision 1.
REAC
PASS Compilation Bulletin
Below
you will find a link to the updated REAC Compilation Bulletin, Revision
1.
This
Revision replaces the previous version, dated 8/26/2002. That document
should no longer be used.
Starting
January 1, 2008, all inspections must be conducted according
to the standards and practices outlined in this document, the REAC
Compilation Bulletin, Revision 1.
Please
read this document carefully so that you are familiar with the procedures
contained within. This Revision incorporates all previous guidance
that HUD has given on a number of matters pertaining to physical
inspections. It provides answers to some of the most common questions
received from inspectors in the field and clarifies certain areas
of the inspection protocol to further ensure that physical inspections
are objective and conducted in accordance with the protocol.
The
information in this Bulletin has been previously communicated to
inspectors through email, training sessions and other methods. It
has been compiled here for ease of reference.
This
edition of the Bulletin supersedes all previous editions and separate
guidance. It is the inspector's responsibility to apply this guidance,
as well as any other guidance issued by the Department, when conducting
all physical inspections using the HUD UPCS protocol.
Please
be sure you replace your existing guidance on these matters with
this new publication.
Failure
to apply and follow the guidelines in this Revision will negatively
impact your performance and evaluation as an inspector.
If
you have any questions about the material included in this Bulletin,
please contact our Technical Assistance Center at 888-245-4860.
Updates
to the information in the Bulletin, as well as other information
of which you need to be aware, can be found at http://www.hud.gov/offices/reac/products/prodpass.cfm
|